VESDA Sensepoint XCL Micro Bore Gas Detector
When used with the VESDA-E VEA, the VESDA Sensepoint XCL Micro Bore gas detector provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats. Through its embedded Bluetooth interface, VESDA Sensepoint XCL enables customers to pair the gas detector with their smart device applications to perform installation, commissioning, and maintenance. This ensures a faster VESDA Sensepoint XCL installation, rapid configuration, simplicity to operate, and simplified maintenance.
Viking Part Numbers
Part # = Gas Range / Target, Relay Type
• XCL-VEA-CO-RA = CO 300ppm 4–20mA
• XCL-VEA-CO-RM = CO 300ppm Modbus
• XCL-VEA-CH4-RA = CH₄ 0–100% LEL, 4–20mA
• XCL-VEA-CH4-RM = CH₄ 0–100% LEL, Modbus
• XCL-VEA-H2-RA = H₂ 1000ppm, 4–20mA
• XCL-VEA-H2-RM = H₂ 1000ppm, Modbus
• XCL-VEA-CO2VV-RA = CO₂ 5% v/v, 4–20mA
• XCL-VEA-CO2VV-RM = CO₂ 5% v/v, Modbus
• XCL-VEA-CO2PP-RA = CO₂ 5000ppm, 4–20mA
• XCL-VEA-CO2PP-RM = CO₂ 5000ppm, Modbus
• XCL-VEA-CO-RA-5 = 5 x CO 300ppm, 4–20mA
• XCL-VEA-CH4-RA-5 = 5 x CH₄ 0–100% LEL, 4–20mA
• XCL-VEA-H2-RA-5 = 5 x H₂ 1000ppm, 4–20mA
Approvals
Electrical Safety:
• EN/UL/IEC61010-1
• CSA-C22.2 No. 61010-1-12
CE — EMC
• EN 50270
Radio:
• RED, FCC, BT SIG
Other:
• UL2075 (CO and CH4), AS 1668.2
Applications
• Residential
• Commercial premises
• Hospitals
• Hotels
• Car parks (underground / enclosed)
• Laboratories
• High tech manufacturing
• Universities and schools
• Chemical / Pharmaceutical
• Indoor air quality monitoring
• Battery rooms
• Fuel storage areas
• Confined spaces
• Food & beverage
• Refrigerated systems (leak detection)
• Greenhouses
Features
• Available Sensors:
—Carbon Monoxide: 0–1000ppm
—Combustible (CAT): 0–100% LEL (Methane, Hydrogen, Propane, Ethanol, Butane, Octane, etc.)
—Hydrogen: 0–1000ppm
—Carbon Dioxide: 0–5.0% v/v
—Carbon Dioxide: 0–5000ppm
• Factory calibrated detectors (CAT: Factory calibrated to CH₄)
• Integral alarm status LEDs
• Bluetooth 4.0 (Bluetooth Low Energy)
• Integrates with PLCs/HVAC/BMS/FACP
• Configurable relays
• 4–20 mA analog outputs or RS 485 Modbus output